WOODLIFE 111
Water Repellent Wood Preservative
Product Data Sheet
Do Not Dilute
FOR INDUSTRIAL USE ONLY
Woodlife is Inside
PRODUCT USE
PRODUCT ACCEPTANCE
This product is a wood preservative
Woodlife 111 is a unique blend of water
registered for prevention of decay, rot and
repellent and wood preservative ingredients
other fungi in wood products for above
developed for the protection of wood products
ground use (EPA Reg. No. 60061-103;
in above ground exposures. Woodlife 111
EPA Est. No. 60061-MO-1; Applicable State
was developed to treat millwork, shingles,
Registrations). This product is recognized
siding, plywood, hardboard, flakeboard,
by WDMA for its Hallmark Certification
structural lumber, fences, and other wood
Program.
products. Woodlife 111 can be used in the
treatment of pine and non-pine sash and other
We recommend effective termite control
millwork components to meet the Hallmark
products such as Timbertreat ICP-5 to
program of the WDMA.
be combined with this product for use in
Termite Hazard Zones.
Woodlife 111 is a clear penetrating,
nonswelling, paintable, water repellent wood
Contact your local Kop-Coat specialist to
preservative. It helps control the growth of
determine which other lumber protectants
decay fungi, staining fungi, surface mold and
and additives can be used in combination
mildew, to meet the WDMA Industry Standard
with this product.
for a water repellent preservative (WDMA
Standard I.S.-4). It stabilizes wood against the
PHYSICAL PROPERTIES
effects of moisture and reduces dimensional
changes that can cause swelling, warping and
splitting. Weight per Gallon:.....................6.5 lbs./gal
DIRECTIONS FOR USE
Flash Point:........................................105¡ãF
STORAGE & DISPOSAL
% VOC*:...............................................98%
Freeze/Thaw Stable:..........................yes
Store and dispose of the product in
Minimum Storage Temperature:........40¡ãF
Machine, cut, glue and sand wood as
accordance with all Federal, State and local
Max Storage Temperature:..............100¡ãF
desired before treating. Do not use over
laws and regulations. See product label for
previously finished or stained wood without
additional information.
Physical properties of end-use treatments
stripping off the old finish. Do not use steel
will vary based on additives and other
wool. Wood must be clean and dry before
components added to the solution.
treatment. The temperature of the treating
ENVIRONMENTAL, HEALTH &
solution, wood and surrounding air must be
SAFETY
*Check with local authorities on VOC
above 40¡ãF (4.4¡ãC). Apply by immersion,
designations.
flood coat, spray or brush. Do not use high
Please refer to the product's labeland Material
pressure spray. Any surface cut after the first
QUALITY CONTROL & QUALITY
Safety Data Sheet for this information.
treatment should be re-treated in accordance For medical emergencies,
ASSURANCE
with WDMA IS-4. Millwork and other items
to be painted should be treated to achieve a
retention of 125 ppm total active ingredients.
Active ingredient concentration of solutions
contact 1-800-548-0489
The treatment should be completely dry and
may be monitored by use of x-ray
odor free before glazing, painting, or
fluorescence methods as well as HPLC.
varnishing or further processing. Allow 24 to
48 hours under average temperature and
Independent labs can conduct analyses
PACKAGING
humidity conditions for drying. Forced heat
for you. Kop-Coat also offers analytical
drying is a good method to accelerate drying.
services for its products to help you
Some species and types of wood products
Bulk tank truck
maintain your program.
may take longer to dry.
55 gallon steel drums
5 gallon pails
Contact your local Kop-Coat specialist for
Contact your local Kop-Coat specialist for
additional QC/QA information.
recommended concentration, application and
adhesion testing procedures to help you
Woodlife and Timbertreat are registered
achieve your treatment requirements. trademarks of Kop-Coat, Inc. For more information contact:
436 Seventh Avenue
1850 Koppers Building
Pittsburgh, PA 15219
e-mail: ippd@kop-coat.com
www.kop-coat.com
APRIL 2008
© Copyright 2015. "Honest Joy Holdings" All rights reserved.